DPV-50B VHF/UHF Multi Band Antenna Omni 100-156/100-156/225-400 MHz
Frequency Range: 100-156/100-156/225-400 MHz
Gain: 0 dBi
VSWR: 2.0:1
Polarization: Vertical
Pattern: Omnidirectional
Size: 163.5″ L
Request a QuoteAll Inquiries welcome
The DPV-50B antenna consists of three vertically polarized omnidirectional dipole antenna elements. The center dipole covers the frequency range 225 to 400 MHz and the upper and lower dipoles cover the frequency range 100 to 156 MHz. The dipole elements are mounted one above the other on a common axis. This dipole is sealed in a single fiberglass radome that provides both mechanical stability and environmental protection. The antenna is designed for ground-to-air communications and use in an extreme environment. It is provided with a coaxial mounting arrangement to mount atop a 2-1/2 inch IPS pipe, enclosing the electrical connections away from the environment.
Spec Sheet
|
SPECIFICATIONS |
PERFORMANCE |
|---|---|
| Frequency Range | 100-156 & 225-400 & 225-400 MHz |
| VSWR | 2.0:1 |
| Gain | 0 dBi |
| input Impedance | 50 Ohms |
| Mounting | mounting on the end of a 2.5 IPS pipe. |
| Power Capability | 100 Watts each input |
| Wind | 150 MPH wind with .5 inches of radial ice |
| Size | 163.5 inches, Length |
| Number of Inputs | 3 |
| Isolation | 30 dB |
| Radome Diameter | 4.75 inches |
| Shipping Weight | 40 lbs |
| Finish | gray polyurethane paint |
| Elevation Beam Maximum Location | Horizon, plus or minus 10 degrees |
| Azimuth Coverage | Omni, plus or minus 1 dB |
| Radome Material | The radome is filament wound epoxy fiberglass that exhibits superior environmental capabilities. |
| Equipment Supplied | UG-1185 mating connectors, .375-16 stainless steel mounting bolts, and a grounding lug. |



